Rope Cutters quicKutter™

£192.00 for 1.5" shaft Un hardened blades
This is for an S16 with 23.00mm of TL 25x90 spool suitable for a 35.00mm gap bearing carrier to prop. (£219.70 inc vat and next day by 1pm delivery)

£345.50 for 2.0" shaft hardened blades
This is for an SH25 with 25.00mm of TL48x123 spool suitable for a 37.00mm gap, bearing carrier to prop. (£420.06 inc vat and delivery next day by 1pm)

In any country where we do not have a local distributor we provide full technical support and will supply product from the UK or Australia in either US$, €, or £.

Rope Cutters come in four standard sizes suitable for different spool sizes, the spool size relates closely to the outside diameter of the bearing carrier or P bracket. Shafts up to 60mm Ø are likely to have a bearing carrier smaller than 90mm Ø.

A fitting questionnaire detailing all required dimensions can be
found on the rope cutter page, link on the right, these include full fitting instructions.

S16/SH16 ~25mm-60mm Ø shaft. Spool OD smaller than 100mm

S25/SH25 ~44mm-200mm Ø shaft. Spool OD greater than 90.00mm

Larger cutters are available, we will advise when and where these may be needed, these models are built to order.

• S32
• S57

Sizes larger than the S57 can be made to order.

All cutters available with standard stainless 316L blades or optional Hardened blades cutter ref: SH

Individual replacement blades available in either standard or hardened versions.

Prices: (all prices Ex Tax, delivery and fitting)

Spool Material: Spool material is supplied separately. The diameter and length of spool will depend on individual drive set up. Toughrtex material is supplied in a range of external and internal diameters. A range of sizes are usually available ex stock as listed below. Other sizes can be made to order.

Prices subject to change without notice

Thanks to HSBC commercial services increasing charges as from 1st May 2006 we will have to charge for card transactions.

3.99% for all credit card transactions.
Visa Debit cards have no additional charge

EU QuicKutter prices
Cutter	Part No	RRP €	£
Complete standard	S16	250.00	179.00
Complete standard	S25	339.00	242.00
Complete standard	S32	497.00	355.00
Complete hardened	SH16	360.00	257.00
Complete hardened	SH25	455.00	325.00
Complete hardened	SH32	695.00	496.43
Blade Only Standard	S16B	80.00	57.00
Blade Only Standard	S25B	85.00	61.00
Blade Only Standard	S32B	110.00	79.00
Blade Only Hardened	SH16B	165.00	118.00
Blade Only Hardened	SH25B	179.00	128.00
Blade Only Hardened	SH32B	279.00	199.00
Outboard hardened	OBH	345.00	246.00
ToughRtex spool material prices priced per mm length. Part number indicates IDxOD in mm.
Min order 50mm		Cost/mm	Cost/mm
Log Length	Part No	€/mm	£/mm
850	TL25x90	0.75	0.54
850	TL38x90	0.70	0.50
850	TL48x102	0.80	0.57
850	TL48X123	1.14	0.82
850	TL57X127	1.15	0.82
850	TL57X140	1.41	1.01
850	TL60X152	1.93	1.38
850	TL74X152	1.51	1.08
850	TL74X175	2.14	1.53
850	TL74X180	2.29	1.64
850	TL87X220	3.61	2.58
850	TL94X220	3.48	2.48
850	TL94X270	6.19	4.42
850	TL108X200	2.42	1.73
850	TL121X225	3.13	2.23
850	TL150X300	6.61	4.72

SandStopper™

For shaft sizes

• 50mm Ø - £492
• 75mm Ø - £781
• 100mm Ø - £1086

Fitting sheets can be downloaded from the rope cutter page use the link on the right, these give full details of measurements required, tools and equipment needed and fitting process.

Technical support contact:Engineering

Sales/prices contact:Sales