H4 quicKutter prices

quicKutter™ prices and size guide

You will also need spool material, the ammount and size will depend on a number of factors
typically spool material for shafts up to 65.00mm will cost around £30-£40 per shaft

Size of cutter depends on the outside diameter of the bearing carrier.
Carrier less than 100.00mm = S16/SH16 larger than 100.00mm = S25/SH25
There are two sizes of quicKutter™ that cover shaft sizes from 25.00mm to 0ver 150.00mm larger than this please contact us
S16 quicKutter™ suitable for spools of less than <100.00mm OD Fitted with unhardened blades	£240.00
SH16 quicKutter™ suitable for spools of less than <100.00mm OD Fitted with hardened blades	£322.00
S25 quicKutter™ suitable for spools greater than >100.00mm OD Fitted with un hardened blades	£300.00
SH25 quicKutter™ suitable for spools greater than >100.00mm OD Fitted with hardened blades	£451.00

H4 Marine Limited innovation in technology